NPS Reagent Kit and NPS Training Kit Documents

To ensure calibration particles and solutions are stored under the correct conditions, please read all instructions carefully upon opening the kits.

Download the NPS Reagent Kit Specifications and Preparations Guide here.

Access safety data sheets here.

Components included in the NPS Training Kit and NPS Reagent Kit are listed in the tables below.

Table 1: NPS Training Kit Components

Kit component	Quantity	Storage Instructions
NPS Reagent Kit	1	Store at room temperature (15 - 25 °C)
Chips (SC80)	5
Chip tray	1
Pressure syringe tool fitting	1
1.5 mL Axygen tubes	10
ESD tweezers	1
15 mL Falcon tubes	4
10 mL syringes	4
Pressure Application Device (PAD)	1
Dual force syringe	1
Spare fluid cell O-rings	8
Fluid cell screws	2
Allen key (2.5 mm)	1
CPC100 calibration particles	1 x 0.5 mL vial	DO NOT FREEZE Store at 4-8°C
CPN80 neutral calibration particles	1 x 0.5 mL vial	DO NOT FREEZE Store at 4-8°C

Table 2: NPS Reagent Kit Components

Kit Component	Quantity	Storage Instructions
PBS tablets	4	Store at room temperature (15 – 25 °C)
Syringe filters (13 mm x 0.22 μm)	20	Store at room temperature (15 – 25 °C)
Wetting Solution concentrate	1	Once opened, store at 4-8°C
	Once the Measurement Electrolyte solution has been prepared, store at 4-8 °C.

NPS Reagent Kit Warning:

The Wetting Solution concentrate contains trace amounts of sodium azide (0.05% w/v). Avoid direct contact with skin and eyes. Refer to the NPS Reagent Kit Specifications and Preparations Guide and safety data sheet for more information on hazards and warnings.