How do I set up my Pulsoid system?

1. Unpack the Pulsoid and check all components are there before throwing any packaging away. We recommend keeping the box in case the Pulsoid needs servicing.
2. Place the Pulsoid on a stable, level lab bench, where it can be quickly unplugged from the mains.
3. Plug the power cable into a wall socket.
4. Connect the 24 V power supply to the back of the Pulsoid. Don’t cover the power supply, and keep it away from fluids.
5. Plug the USB-C end of the cable into the back of the Pulsoid, and the USB-A end into your computer.
6. Switch on at the wall, then press and briefly hold the power button (top of the instrument, back right corner) until the halo lights turn on.
7. Open the Pulsoid Control Suite (PCS) from the Start menu.
8. Check the Device Status panel. The instrument changes from “Not Connected” to “Connected”, and the pressure system shows “Calibrating”. When it shows “Active” and the lid shows “Closed”, the Pulsoid is ready to use.

To shut down, press and hold the power button until the instrument turns off.

Related articles:

• Getting started with the Pulsoid

• What are the required PC specifications for the Pulsoid?